Home Power management Power switches eFuses & hot swap controllers
Home
Power management
Power switches
eFuses & hot swap controllers
NEW

TPS7H2211-SEP

ACTIVE

Radiation-tolerant 4.5-V to 14-V input 3.5-A eFuse

Order now
Data sheet

TPS7H2211-SEP

ACTIVE
Data sheet Order now

Product details

FET Internal Ron (typ) (mΩ) 45 Vin (min) (V) 4.5 Vin (max) (V) 14 Vabsmax_cont (V) 16 Overcurrent response Circuit breaker Fault response Auto-retry Soft start Adjustable Overvoltage response Cut-off Features Overvoltage protection, Reverse current blocking always, Soft-start, Thermal shutdown Rating Space Device type eFuses and hot swap controllers Operating temperature range (°C) -55 to 125 Function Inrush current control, Overvoltage protection, Reverse current blocking, Short circuit protection, Thermal shutdown
FET Internal Ron (typ) (mΩ) 45 Vin (min) (V) 4.5 Vin (max) (V) 14 Vabsmax_cont (V) 16 Overcurrent response Circuit breaker Fault response Auto-retry Soft start Adjustable Overvoltage response Cut-off Features Overvoltage protection, Reverse current blocking always, Soft-start, Thermal shutdown Rating Space Device type eFuses and hot swap controllers Operating temperature range (°C) -55 to 125 Function Inrush current control, Overvoltage protection, Reverse current blocking, Short circuit protection, Thermal shutdown
HTSSOP (DAP) 32 89.1 mm² 11 x 8.1
  • Total ionizing dose (TID) characterized to 100 krad(Si)
    • Radiation hardness assurance availability of 100 krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75 MeV-cm2/mg*
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized to LET = 75 MeV-cm2/mg*
  • Integrated single channel eFuse
  • Input voltage range: 4.5 V to 14 V
  • Low on-resistance (RON) of 60-mΩ maximum at 25°C and VIN = 12 V
  • 3.5-A maximum continuous switch current
  • Low control input threshold aids in use of 1.2-V, 1.8-V, 2.5-V, and 3.3-V logic
  • Configurable rise time (soft start)
  • Reverse current protection (RCP)
  • Overvoltage protection (OVP)
  • Internal current limit (fast-trip)
  • Thermal shutdown
  • Ceramic and plastic package with thermal pad
  • Available in military (–55°C to 125°C) temperature range
  • Total ionizing dose (TID) characterized to 100 krad(Si)
    • Radiation hardness assurance availability of 100 krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75 MeV-cm2/mg*
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized to LET = 75 MeV-cm2/mg*
  • Integrated single channel eFuse
  • Input voltage range: 4.5 V to 14 V
  • Low on-resistance (RON) of 60-mΩ maximum at 25°C and VIN = 12 V
  • 3.5-A maximum continuous switch current
  • Low control input threshold aids in use of 1.2-V, 1.8-V, 2.5-V, and 3.3-V logic
  • Configurable rise time (soft start)
  • Reverse current protection (RCP)
  • Overvoltage protection (OVP)
  • Internal current limit (fast-trip)
  • Thermal shutdown
  • Ceramic and plastic package with thermal pad
  • Available in military (–55°C to 125°C) temperature range

The TPS7H2211 is a single channel eFuse (integrated FET load switch with additional features) that provides reverse current protection, overvoltage protection, and a configurable rise time to minimize inrush current, soft start. The device contains P-channel MOSFETs that operate over an input voltage range of 4.5 V to 14 V and supports a maximum continuous current of 3.5 A.

The switch is controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. Overvoltage protection and soft start are programmable with few external components through the OVP and SS pins. The TPS7H2211 is available in a ceramic and plastic package with an exposed thermal pad allowing for improved thermal performance. A standard microcircuit drawing (SMD) is available for the QML 5962R1822001VXC. A vendor item drawing (VID) is available for the -SEP variant, V62/23609.

The TPS7H2211 is a single channel eFuse (integrated FET load switch with additional features) that provides reverse current protection, overvoltage protection, and a configurable rise time to minimize inrush current, soft start. The device contains P-channel MOSFETs that operate over an input voltage range of 4.5 V to 14 V and supports a maximum continuous current of 3.5 A.

The switch is controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. Overvoltage protection and soft start are programmable with few external components through the OVP and SS pins. The TPS7H2211 is available in a ceramic and plastic package with an exposed thermal pad allowing for improved thermal performance. A standard microcircuit drawing (SMD) is available for the QML 5962R1822001VXC. A vendor item drawing (VID) is available for the -SEP variant, V62/23609.

open-in-new Find other eFuses & hot swap controllers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 10
Type Title Date
* Data sheet TPS7H2211-SP and TPS7H2211-SEP Radiation-Hardness-Assured (RHA) 14-V, 3.5-A eFuse datasheet (Rev. E) PDF | HTML 14 Dec 2023
* Radiation & reliability report TPS7H2211-SEP Production Flow and Reliability Report PDF | HTML 29 Sep 2023
* Radiation & reliability report TPS7H2211-SEP Total Ionizing Dose (TID) Report (Rev. B) PDF | HTML 28 Sep 2023
* Radiation & reliability report TPS7H2211-SEP Neutron Displacement (NDD) Characterization Report PDF | HTML 28 Aug 2023
* Radiation & reliability report Single Event Effects Report of the TPS7H2211-SEP eFuse PDF | HTML 07 Jun 2023
EVM User's guide TPS7H2211EVM Evaluation Module User's Guide PDF | HTML 11 Jul 2023
Certificate TPS7H2211EVM EU Declaration of Conformity (DoC) 21 Jun 2023
Application note Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 15 Sep 2022
Selection guide TI Space Products (Rev. I) 03 Mar 2022
E-book Radiation Handbook for Electronics (Rev. A) 21 May 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS7H2211EVM — Space-enhanced product, 4.5-V to 14-V input, 3.5-A, load switch and eFuse evaluation module

The TPS7H2211EVM demonstrates the operation of a single TPS7H2211 eFuse space enhanced product. The board provides footprints that can be populated with additional components to allow for testing of customized configurations, such as parallel or redundant eFuses.

User guide: PDF | HTML
Not available on TI.com
Simulation model

TPS7H2211-SP PSpice Transient Model

SLVMDN6.ZIP (27 KB) - PSpice Model
Download
Calculation tool

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Supported products & hardware

Supported products & hardware

This design resource supports most products in these categories.

Check the product details page to verify support.
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins Download
HTSSOP (DAP) 32 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos